|
Cold Gun Aircoolant Systems
The Exair standard Cold Gun and High Powered Cold Gun Aircoolant Systems incorporate a vortex tube to convert an ordinary supply of compressed air into two low pressure streams, one hot and one cold. The Cold Guns hot airstream is muffled and discharged through the hot air exhaust. The cold air is muffled and discharged through the flexible hose, which directs it to the point of use. Easy mounting and portability is provided through the use of an attached magnetic base. Heat build up on dry machining operations reduces tool life and machining rates. The Cold Gun Aircoolant system produces a stream of clean cold air at 50 F below supply air temperature. Operaton is quiet and there are no moving parts to wear out.
The 5015 15 SCFM Cold Gun Aircoolant System is designed to use full line pressure of 80-100 PSIG. Temperature drop and flow are reduced when lower input pressures are applied.The unit is 10" OAL with a 3/8 NPT female connection for outlet.
|
The High Power Cold Gun produces twice the airflow of the standard Cold Gun. The unit is 10" OAL with a 3/8 NPT female connection for outlet. The unit mounts with an attached magnetic base. A Cold Gun is designed to use full line pressure of 80-100 PSIG.
|
The 5901 Single Point Hose Kit is recommended for applications were a concentrated airflow is needed such as drilling and grinding operations.
The overall length is 11" and has a 3/8 NPT male thread for connecting to the air gun.
|
The 5902 Dual Point Hose Kit is recommended for applications were the heat is generated over a larger surface area such as band sawing, milling, chill rolls and hot melt adhesives. The OAL is 11" and has a 3/8 NPT male thread for connecting to the air gun
| | |
|
|