FDC-90 Series

The 90 series controllers take advantage of time proven SMD technology. The software has been refined and offers logical menu structures and advanced noise immunity. By using the unique "SEL" function, the user has the flexibility of assigning the parameters to be shown at the operator level. Manual control of the output is standard with offset and shift functions to allow process values to be corrected for intrinsic offsets and on-site calibrations. Dual alarms can be independently configured as process alarm, deviation alarm, deviation band alarm or latching alarm. The 90 series offers a wide variety of options to meet your control needs for 1/16, 1/8 or 1/4 DIN panel cutouts.

Power:                                                         Control:                                                                           Indication:                                    
90-264VAC, 50/60Hz                                                Proportional Band:                                                              Process Display: Red LED, 4 digits
20-32VAC/VDC                                                        0-200 degrees C (0-360 degrees F)                                  Setpoint Display: Green LED, 4 digits
Input:                                                                    Reset (Auto)                                                                          Status Indicator: Output, Alarm, C and F
Thermocouple (T/C):                                                 0-3600 seconds                                                                Dimensions/Weight:
Type J,K,T,E,B,R,S,N,                            Rate (Derivative)                                                                 Model 9090 1.89" (H) x 1.89" (W) x 3.70" (D) 6.0 oz (170 grams)
RTD:                                                                           0-1000 seconds                                                                    Model 8120 3.77" (H) x 1.88" (W) x 2.55" (D)  8.46 oz (240 grams)                           
PT 100 ohm RTD (DIN or JIS)                                Cycle Time:                                                                          Model 8130 3.77" (H) x 1.88" (W) x 2.55" (D)  9.17 oz (260 grams)
Range:                                                                        0- 120 seconds                                                                    Model 4120 3.77" (H) x 3.77" (W) x 2.08" (D) 8.46 oz (240 grams)
User configurable                                                      Ramp Rate:
Accuracy:                                                                    0-200 degrees C(0-360 F)/ minute
Typically Better than +- .25% of span                      On-Off:
Cold Junction Compensation:                                    With adjustable hysteresis (0-20% of span)
0.1 degree C/ C ambient typical                              Dwell:
Sensor Break:                                                             0-3600 minutes
Protection Mode configurable                                 Control Action:
External Resistance:                                    Direct and reverse
100 ohms maximum
Normal Mode Rejection:
60dB
Common Mode Rejection:
120dB
Sample Rate:
3 times per second