Forged Carbon Steel Shoulder Eye Bolts in a range of threads from 1/4"-20 up to 2"-4 1/2. These bolts are manufactured from C1030 Carbon Steel to ASME B18.5 and tested to ASTM A489 specifications.
NOTICE:
Loads should always be aligned to the plane of the eye, not at an angle to the plane. Load ratings are for vertical lifting only with thread fully engaged. At a 45 degree angle load rating drops to 25% of listed rate. Do not use at an angle greater than 45 degrees see Safety Hoist Rings for lifts greater then 45 degrees.
Shoulder Eye Bolts must be firmly seated and flush against the mating surface.
For Assistance Please Call 800-248-2779 or 830-220-2440
K2021 Forged shoulder eye bolt with a 1/4-20 thread. The shank length is 1" long with a ring I.D. of 3/4" and ring O.D. of 1-3/16". The shoulder diameter is 17/32" with a shoulder height of 5/32". The maximum safe load capacity on a straight lift is 500 #
|
K2023 Forged shoulder eye bolt with a 3/8-16 thread. The shank length is 1-1/4" long with a ring I.D. of 1" and ring O.D. of 1-21/32". The shoulder diameter is 11/16" and shoulder height of 3/16". The maximum safe load capacity on a straight lift is 1300#
|
Forged shoulder eye bolt with a 1/2-13 thread. The shank length is 1-1/2" long with a ring I.D. of 1-3/16" and ring O.D. of 2-1/16". The shoulder diameter is 7/8" and shoulder height of 7/32". The maximum safe load capacity on a straight lift is 2400 #
|
Forged shoulder eye bolt with a 5/8-11 thread. The shank length is 1-3/4" long with a ring I.D. of 1-3/8" and ring O.D. of 2-1/2". The shoulder diameter is 1-1/16" and shoulder height of 1/4". The maximum safe load capacity on a straight lift is 4000 #
|
K2028 Forged shoulder eye bolt with a 3/4-10 thread. The shank length is 2" long with a ring I.D. of 1-1/2" and ring O.D. of 2-13/16". The shoulder diameter is 1-1/4" and shoulder height of 5/16". The maximum safe load capacity on a straight lift is 5000#
|
Forged shoulder eye bolt with a 1"-8 thread. The shank length is 2-1/2" long with a ring I.D. of 1-13/16" and ring O.D. of 3-9/16". The shoulder diameter is 1-9/16" and shoulder height of 13/32". The maximum safe load capacity on a straight lift is 9000 #
|
K2032 Forged Shoulder Eye Bolt with 1 1/4-7 thread. The shank length is 3" long with a ring I.D. of 2-3/16" and ring O.D. of 4-7/16". The shoulder diameter is 1-7/8" and shoulder height of 1/2". The maximum safe load capacity on a straight lift is 15000#
|
Forged Shoulder Eye Bolt with 1 1/2-6 thread. The shank length is 3-1/2" long with a ring I.D. of 2-1/2" and ring O.D. of 5-3/16". The shoulder diameter is 2-3/16" and shoulder height of 9/16". The maximum safe load capacity on a straight lift is 21000 #
|
Forged shoulder eye bolt with 1 3/4-5 thread. The shank length is 3-3/4" long with a ring I.D. of 2-7/8" and ring O.D. of 6-1/16". The shoulder diameter is 2-1/2" and shoulder height of 5/8". The maximum safe load capacity on a straight lift is 28000#
|
K2036 Forged shoulder eye bolt with 2"-4 1/2 thread. The shank length is 4" long with a ring I.D. of 3-1/4" and ring O.D. of 6-7/8". The shoulder diameter is 2-7/8" and shoulder height of 3/4". The maximum safe load capacity on a straight lift is 38000#
|
N2028-15 3/4-10 Thread galvanized shoulder eye bolt, 15" shank length, 6" threaded length supplied with a 3/4-10 hex nut.
|
K2021-3-SS 1/4-20 threaded forged long shank shoulder eyebolt. This eyebolt has a 3" fully threaded shank length with a 1 3/16" eye O.D. and a 3/4" eye I.D. Overnite Supplies long shank shoulder pattern eye bolts are drop forged from 304 stainless steel.
|