IB250 1/4"-20 Threaded Forged Shoulder Eye Bolt

K2021 Forged shoulder eye bolt with a 1/4-20 thread. The shank length is 1" long with a ring I.D. of 3/4" and ring O.D. of 1-3/16". The shoulder diameter is 17/32" with a shoulder height of 5/32". The maximum safe load capacity on a straight lift is 500 #
NOTICE:
Loads should always be aligned to the plane of the eye, not at an angle to the plane. Load ratings are for vertical lifting only with thread fully engaged. At a 45 degree angle load rating drops to 25% of listed rate. Do not use at an angle greater than 45 degrees see Safety Hoist Rings for lifts greater then 45 degrees.
Shoulder Eyebolts must be firmly seated and flush against the mating surface.